Plato's Allegory of the Cave in realtion to school teachers or Essay

Plato's Allegory of the Cave in realtion to school teachers or students - Essay Example In Plato’s story, the prisoners were chained to a cave wall with the inability to move their heads. All the prisoners could see were shadows and all that they could hear were echoes. These shadows and echoes are like feelings and hearsay. Many people have false notions based on hearsay and feelings. One misconception an elderly relative of mine has is the belief if medicine is followed by water the medicine is watered down and ineffective. It does not matter how many times I explain that a medicine’s dosage is what makes it effective, their feelings on this matter does not waiver. Many people try different methods of things not by knowledge, but because of what a neighbor recommends. If all the knowledge a person has comes from feelings and hearsay, it would be like hearing echoes and seeing shadows in a cave. No truth can be found until someone wants to walk in the sun. Teachers, like the sun in the story, must educate their students in truth. Some teachers with an aggressive or harsh style tend to put students off. A teacher must illuminate the subject they teach for their students. Just like the harsh sun beating down on a prisoner’s weak eyes in the parable, if the learning process is too taxing or painful, a student will only learn enough to pass the course, not permanently retaining the knowledge. This could lead to a student staying ignorant, because being ignorant is easy. Looking into the sun hurts and takes an effort, just like the learning process. Another important comparison is the cave and ignorance. Some students refuse to learn because of the familiarity of ignorance. The cave was all that the prisoners knew. Some released prisoners would flee from the light for the refuge of the cave. It is very easy to slide though school, only doing enough work to pass, but not to learn the thirst of knowledge. Upon high school graduation,

Angles and Demons by Dan Brown Essay Example for Free

Angles and Demons by Dan Brown Essay Angles and Demons by Dan Brown was a reading choice out of curiosity rather than real interest because of the Da Vinci Code by the same author. I wanted to see what other works of fiction Dan Brown came up with before his controversial book. This book had me raising my eyebrows more than a few times with story line but that did not stop me from turning the pages until I got to the end. Angels and Demons basically follows the same formula as the Da Vinci Code. It begins with a murder which only Robert Langdon seems capable of solving with his knowledge of religious iconology and history; a strong female character, Vittoria Vetra, daughter to the murder victim Leonardo Vetra, assists Langdon in his â€Å"quest†; a hired assassin who is delusional, a fanatic and has unquestionable loyalty to his belief carries out an unforeseen but well-crafted plan; an ancient secret society, the Illuminati, is out to get revenge on the Church; finally, an unexpected mastermind who calls himself as Janus, works behind the curtains. An anti-matter canister was stolen from CERN when Leonardo Vetra was murdered and this is assumed to have a life span of 24 hours before the batteries die and it explodes. Brown remains true to using archaic bits of knowledge to leave a trail for Robert Langdon and Vittoria Vetra to follow from Switzerland to the Vatican City in order to find the missing anti-matter canister and find the murderer of Leonardo Vetra. The plot thickens when the anti-matter canister bomb threatens the Vatican and the conclave in the process of choosing the new Pope. The book ends dramatically with a seemingly miraculous event followed by the declaration of a new Pope. Though I enjoyed the chase more from Angels and Demons rather than the Da Vinci Code, I must say that, as a priest, Brown seems have some issues with the Church to come up with troubling concepts for his books. First you have Leonardo Vetra, a priest who turns away from the Church. He becomes a leading physicist of CERN and, together with his adopted daughter, tries to find God through science and research. They seem to be successful with the development of the anti-matter, which was stolen when Vetra was murdered. You also have a Pope who sired a child with a nun, though through artificial means. The child later becomes his camerlengo, the Pope’s Chamberlain. The camerlengo, Carlo Ventresca, unaware of his paternal parentage, murders the Pope upon knowing his dark secret with the belief that he is both cleansing and protecting the Church. Though the book is admittedly a work of fiction, it borders on tarnishing how Catholics and non-Catholics may view the Church and its priests. Brown puts into question the honesty and loyalty of priests to the Mother Church and their commitment to the vow of celibacy, as seen with the Pope. It is appalling to think that Jesus’ surrogates on Earth would be the first ones to violate their vows. Brown also pits religion versus science. Leonardo Ventra is murdered for his research on anti-matter which can supposedly prove the beginning of life, that science can prove God’s existence. I’d like to think that religion is a matter of faith and science is a matter of fact, the two just can’t mix when it comes to explaining God. Then you have the camerlengo who is himself delusional and a fanatic in his belief that the Church, and not science, is the saving power of the world with himself at the wheel of salvation. He goes to great lengths to get the world’s attention, discredit Science and put the Church on a pedestal for the world to see. Angels and Demons made me uncomfortable with the image of the Church that it created – a divided, secretive, vindictive and vulnerable body. Readers, both Catholics and non-Catholics should be discriminating of the events in this book, lest they forget that this is only a work of fiction.

Adolf Hitler :: essays research papers

EARLY YEARS Adolf Hitler was born in Austria, on the 20th of April 1889. His father was a customs officer and his mother a peasant girl, he was a poor student who never completed high school. He lived in Vienna until 1913 and lived off his orphans pension and money from pictures he drew. He read a lot of books and began to develop anti-Jewish and antidemocratic beliefs, a like to outstanding individuals and a dislike for ordinary working people. In World War I Hitler, who was in Munich, volunteered in the *Bavarian army. He proved to be a dedicated and courageous soldier but he was never promoted beyond private first class. After Germany’s defeat in 1918 he returned to Munich staying in the army till 1920. His commander then made him an educational officer with the permission to justify his charges against pacifist and democratic ideas. In September 1919 he joined the nationalist German Workers party and in April 1920 he went on to work full time for the party that had changed its name to the National German Workers (nazi) party. In 1921 he was elected party chairman with very dominating powers. RISE TO POWER Hitler after organizing many meetings, terrorizing political rivals spread his racial hatred and soon became an important part in Bavarian Politics, and was assisted by his high officials and businessmen. In November 1923 he led an uprising against the Weimar Republic but without military support his rebellion failed and as the organizer he was sentenced to five years in prison, of which he served 8 months and was then released as the result of a general amnesty. He then rebuilt his party without interference from the government in December 1924. When the Great Depression struck in 1929 his theory of it as a Jewish plot to make Germany a communist country was accepted by many Germans, he then promised a stronger country with many jobs and national glory, he attracted millions of voters and Nazi representation in Germanys parliament rose from 12 seats to 107 in just 2 years. During the next two years the nazi party kept expanding and benefiting from the growing unemployment, fear of e veryone becoming an equal (communism) and the shyness of his political rivals. GERMANY’S DICTATOR When Hitler established himself as a dictator thousands of anti-Nazis were hauled off to concentration camps and all public knowledge was kept quiet. An Enabling Act passed by a passive legislature allowed him to modify the government system and judiciary, replace all labour unions with one Nazi controlled German Labour Front, and ban all political parties except his own.

History of the PC :: Essays Papers

History of the PC â€Å"If one thinks about it, it is truly remarkable how far the technology has advanced since the first digital computer was introduced in 1946. The ENIAC (Electronic Numerical Integrator and Calculator) was designed and built at the University of Pennsylvania. It weighed 30-tons and took up 1500 square feet of floor space. The first computer developed in Europe was the EDSAC (Electronic Delay-Storage Automatic Computer). This machine was built at Cambridge University in 1949. What characterized these earliest machines is that the switching and control functions were handled by vacuum tubes. This feature typifies what is termed the first-generation of computers. EDSAC had one feature that ENIAC lacked. Within the computer was stored the instructions to control the machine and the data to be operated upon. This was the first of the stored program computers. The first commercially available digital computer was the Sperry Rand UNIVAC I. This was sold to the Bureau of the Census and put in place in 1951. In the late 1950's the bulky and hot vacuum tubes were replaced in computer designs by smaller, more reliable solid state transistors. The use of transistors as the basic component of computer design characterizes what is known as the second generation of computers. 1963 brought about the start of third-generation computers. Solid-logic technology (SLT) enabled the development of the integrated circuit (IC). ICs allowed the placement of as many as 664 transistors, diodes and other associated components on silicon chip less than one eighth of an inch square. We are now in the midst of the fourth-generation of computers. Characterized by continued miniaturization of circuitry, such developments as large-scale integration (LSI) and very large-scale integration (VLSI) have enabled the current crop of machines to have a level of power and speed that was almost unimaginable 20 years ago. Now on to the history of the microcomputer. The first commercially available personal computer was the Scelbi-8H that went on sale in March 1974. The machine was designed around the Intel 8008 microprocessor, a less powerful 8-bit design than the later 8080. A machine in kit form with 1K of memory sold for $440.00. About 200 of these machines were sold in kit form and assembled. Half were the Scelbi-8H hobby machines, the rest were Scelbi-8B business computers, which were released in April 1975, having as much as 16K of memory. The first commercially successful microcomputer was the MITS Altair 8800 designed by Ed Roberts.

Narrative Report Essay

The idea of having On the Job Training had given me an excitement; excitement to experience work inside the office, meet new people, feel a different environment and be independent. It also help us to become a young professional. I learned more about what On-the-Job Training means and to be patient is more important when you have relationship regarding work with other people especially when you do not know them well. I met new friends inside the CGS Department. I was challenge to do good on every task they will give me. I experience facing different people. Having time management, being responsible on the task given and having good relationship with other people are important. On my On the Job Training I observe that everyone should be alert and attentive at the same time and they can’t afford to commit a mistake because it will affect everything that every cluster was working on for example their auditing, computing and the details even the names. Despite of their busy work, they never fail to put smile on their face. As an trainee we are required to participate in making surprises for those employees who promote in higher position and employees having a birthday celebration. The environment I had on my On the Job Training had an impact to me. I built good relationship with my co-workers and co-trainees. The good environment helped me to have positive vibes as I do my works. Corporate Government Sector (Cluster 5)- This is the office where I was assigned to conduct my On-the-Job Training. On my first day of training, I was very excited and somewhat nervous because of the new environment and the new people surrounding me. I didn’t have any idea of what kind of people they are and it made me adjust myself with their personalities and attitudes. One of my trainee supervisor Ms. Fe Lynette Bautista accompanied me to my table where I will be staying during my On-the-Job Traing. During that moment, I felt that I was really an office girl already having my own office chair and table. The first task that my training supervisor asked me to do is to answer telephone calls and telefax. My other trainee supervisor Mr. Felix Morgado taught me to operate telephones, telefax, printers and Xerox machine. After that the head of the cluster 5 Director Dehlia Agatep taught me what to say when theres a phone call, â€Å"Good morning/Good afternoon, Cluster5, How may I help you†. She also taught me how to transfer the call to her office if theres someone who wants to talk to her. My second day, Ms. Editha Palita our Administrative officer asked me to arrange the payslip of the employees, their Rice allowance payslip, Performance based bonus payslip, Basic commodities assistance payslip and July 2014 payslip. At the same time, my ears had to be attentive so that I can hear if theres a phone calls. Some may laugh at my first week which is answering phone calls, making and receiving telefax, photocopy files and arranging slips, but they do not know that I’ve learned many things that which I may used in my future work. My first week was really good start and I was motivated to perform excellently because of what I have already accomplished and because of my trainee supervisors who were very accommodating and kind to me. On my second week of my On-the-Job Training, there are many things that I have accomplished. I was tasked to encode the Department names under the CGS-cluster5. I also printed, it will be the front page of every department’s document so that whenever they need it, they could find it easy. I was also asked to write the important details of the file copies of the official documents to the releasing logbook and after writing the important details, I have to give the file copy of the official documents to the finance office, accounting office and ascom’s office and make them sign on the releasing logbook so that there’s a proof that they already receive it. Just like my first week, my daily tasked was to answer phone calls, make and receive telefax, print documents and arrange some files and documents. Everytime Mr. Felix Morgado calls me for help, I can feel my heart beat like a drum because I always thought he’ll give me hard task. He is slightly strict but an encouraging one. He always tells me to study hard for my family, especially for my parents who are supporting me in every possible way. This second week was really heavy week but despite of it, I really learned a  lot not just academically but socially as well as because I learned to adjust myself to the people I am with and I learn to socialized with them in a good manner.

Free Essays on Dogs of War

such as: â€Å"The blood-dimmed tied is loosed, and everywhere / The ceremony of innocence is drowned;† (5-6). Yeats uses these types of phrases to demonstrate just how difficult it was to live with oneself in those times. No longer can a person go about his merry way. Atrocities have been committed and everyone is guilty. Each person must live with the blood that he has spilled. Written in 1921, this poem is not about the second coming of Christ, it is about how out-of-control we have allowed the world to become after World War I. Line by line, each stanza conveys the heartache experienced after the war to en... Free Essays on Dogs of War Free Essays on Dogs of War The Dogs of War In his poem, â€Å"The Second Coming†, William Butler Yeats uses strong, precise syntax to make the reader feel the intensity of his words while conveying a dark atmosphere that gives the reader an uncertain and seemingly hopeless sense of what is to come. Some would argue that â€Å"The Second Coming† is referring to the second coming of Christ because of the religious aspects of the poem; but I believe that the poem is a warning, telling the reader of the downfall of man that we will bring upon ourselves rather than by Christ. Particularly in the first stanza, Yeats uses punctuation to separate each point that he is trying to project. Each semi-colon represents a singular, complex idea while commas are used to contrast the idea within the semi-colons. Each pause in the poem is focusing on a specific idea. Each break forces the reader to contemplate the different aspects of destruction. Words such as â€Å"anarchy†, â€Å"blood-dimmed†, and â€Å"vexed† are used to magnify the intensity of the poem. Reading the words may not have much of an effect, but saying them out loud bring thoughts of suffering and pain to one’s mind. The overall atmosphere is one of death, destruction, and hopelessness following, I believe, the First World War. This atmosphere molds the same tone into the reader with words such as: â€Å"The blood-dimmed tied is loosed, and everywhere / The ceremony of innocence is drowned;† (5-6). Yeats uses these types of phrases to demonstrate just how difficult it was to live with oneself in those times. No longer can a person go about his merry way. Atrocities have been committed and everyone is guilty. Each person must live with the blood that he has spilled. Written in 1921, this poem is not about the second coming of Christ, it is about how out-of-control we have allowed the world to become after World War I. Line by line, each stanza conveys the heartache experienced after the war to en...

Repetitive Stress Injury RSI

Repetitive Stress Injury RSI Free Online Research Papers Repetitive Stress Injury (RSI) is a very serious injury. To fully understand it, you must know what it is. You must also know the symptoms are, and how you can get it. What occupations does RSI usually occur in? Are there any ways to prevent it? Are there exercises that you can do to prevent it? How can employers prevent this in their employees? In the following paper, you will understand all of these questions and hopefully learn a lot about RSI. Repetitive Stress Injury (RSI) is a disorder in which the muscles and tendons get overused. â€Å"Any activity with repetitive action brings with it the risk of RSI.† (Brown University 2008) This can happen even when you don’t recognize it. If you do the same thing over and over again, you tire the muscle and tendon. RSI injuries can be very painful and you can lose all function of the affected area if you do not get treatment. RSI can affect various parts of the body, not just the hands and wrists. It can involve the neck, shoulders, and even the legs and feet. (faqs.org 2009) When RSI affects the neck, you are probably using your neck a lot. RSI injuries that are neck related do not happen as much as other areas, but if it happens, it happens usually when a person plays sports. For example football players use their necks a lot so they are more likely to get a RSI injury to the neck. RSI that occurs in the arms, wrists, and hands happens when people use their arms, wr ists, and hands a lot. An example of this would be someone who uses the computer a lot, a sewer who uses his or her hands repeatedly over and over again, or a pottery worker who molds clay and uses their hands repeatedly. An example of a shoulder related RSI injury would be a baseball player using his shoulder muscle or tendon to pitch the ball. Each person who comes up to bat gets a pitch. That’s a lot of repetitive motion on the shoulders. The legs and feet RSI would be someone who has to move their legs and feet a lot. For example, someone who used the sewing machine that you need to push down repeatedly with their legs and feet would get a RSI injury to the legs and feet. RSI is not something you can catch. Some people who do repetitive things do not develop RSI, but others do. According to the Bureau of Labor Statistics (BLS), RSI has gotten worse over the years. â€Å"In 1972 23,800 people had RSI and in 1994 332,000 had it†. (bls.gov, 2009) With that figure, it suggests that RSI will increase every year. There are a lot of signs and symptoms of RSI. It is very important to not to ignore the first symptoms of RSI because it is very hard to treat once it is advanced. RSI injuries affecting the hands, wrists, and arms are the feeling of the body part going to sleep, numbness, and tingling. (beadwork.about.com 2009) A very prominent sign that you have RSI is if you wake up at night because of the pain in your arm, hand or wrists. The pain can either be dull or sharp. Your limb could feel rubbery as if it were not a part of your body. If it wakes you up at night, then it’s not something to be ignored because it could get worse. Another symptom you could experience is coldness in the affected body part. The limb can actually look a couple shades lighter than the other parts of the body. One more symptom is not being able to do the normal things you normally do. The loss of strength in the affected area makes the person unable to do the things they used to do.The last symptom that is a good sign that you have RSI is pain in the neck, or shoulder areas when you sit at the computer. You will find yourself trying to bend and twist to try to get the pain away but it doesn’t work because the strain has already occurred. People who use the computer a lot are a lot more susceptible to RSI. Bad posture, incorrect hand placement on the keyboard, and time spent on the computer are ways to get RSI too. Bad posture at the computer makes RSI inevitable. Bad posture puts a strain on the body. Another way to get RSI is being at the computer for long hours with not enough breaks in between. You are not only in the same position and doing the same thing, you can also get headaches from staring at the computer screen for a long period of time. The most common occupations to get RSI, are those on the computer a lot, and athletes. Occupations that use the computer a lot are computer programmers, network and security, medical secretaries, medical technologists including pharmacists, and business. The sport athletes that get RSI a lot are baseball players, golfers, and football players. Computer Programmers, network and security, medical secretaries and technologists, require you to be on the computer for most of the time that you are at work! If you think about this, this is a lot of time! If the average employee works forty hours, and usually works about twenty hours over time that’s sixty hours out of one hundred sixty eight spent doing a lot of repetitive motions. These occupations are vital to the United States of America. Without these occupations our country would plummet. If these occupations are vital, how can we reduce the number of injuries with RSI? A good way to reduce the number of injuries associated with RSI is to take breaks from the repetitive thing that you are doing. If you work in an office with computers, take short breaks. If this is not available for you or you can’t take short breaks you can still take miniature breaks. You can look away from the computer for a couple of minutes and close your eyes. Don’t close your eyes too long though, or your boss may think that you are cat napping! You can also do little exercises. You can take your hands and wrists and stretch them so that they can be relaxed. Stretch your back, your neck and if you can stretch your legs too! Also, make sure the temperature where you work is comfortable and not too cold and not too hot. If you cannot control this, as a lot of us can’t, accommodate the situation. If it is too cold where you work because of air conditioning then put a sweater on. If its too hot, buy a little fan to keep yourself cool. The reason this is imp ortant is because if your body gets too cold or hot you tend not to take yourself away from working. You also tend to slouch and your posture is bad. Another thing you can do to reduce your chance of having RSI is to get a comfortable chair to sit on. Make sure the chair is adjustable so that it can support your back. It is good to have a chair that has arms so you can rest your arms periodically on them. Also, you can position the keyboard in your lap so that your arms can have a rest. Try not to use the mouse. A track ball is better because it glides easier. When you are reading something at the computer, do not keep your hand on the mouse. This makes your arms tense. Whenever you can, try to relax your body. Another good way to get your body out of the bad posturing is to bring little snacks to boost yourself up. Nothing messy of course, but if you suck on a candy it will help you because you are not just working. The main way to prevent RSI is to practice ergonomics. This is the art of designing the job to fit the worker, not the other way around. Ergonomics is looking at your work environment and seeing what triggers your stresses and pains and what doesn’t. This includes the physical and environmental parts of your job. It is not possible to control everything about where you work, but if you can eliminate the stuff you can, you will be less likely to get an injury from RSI. If you already have RSI, you can treat it. Sometimes you may have to have surgery if you ignored the symptoms and let it progress to that stage. When you notice the symptoms of RSI, The first way you can treat it would be resting! If you rest the affected body part it will be easier for you to heal. Another way is to change your environment. As I stated above ergonomics will help you do this. It is very important to do those things because it will help. A lot of the times when someone has been diagnosed with RSI the doctors will prescribe an anti-inflammatory pill. This works because it helps the inflamed area to heal by taking away the inflamed part. One other way to treat RSI is a mixture of hot and cold compresses. The mixture of heat and cold compresses help soothe the inflamed area. If employers took the time to have a class before the employee started work with their job in computers, a lot of the injuries associated with RSI would go down. Both the employer and the employee would be informed on how to do the correct job and still be in good health down the line. Employees would stay at the job longer because they would feel cared about and would look forward to going to work. Most employers do not do this because of the time involved in doing so, and they are not mandated to do so. More and more people become victims of RSI because of the lack of knowledge about RSI. If there were more information about it and the serious complications that come with it, it would be looked at more closely. RSI is an increasing problem. People need to be aware of RSI, so that it has less of an effect on our world. Knowledge is power and together we can inform everyone about RSI. ? Drudi, D. (1997). Have Disorders Associated with Repeated Trauma Stopped Increasing. In Safety and Health. Retrieved on 4/28/2009, from bls.gov/opub/cwc/archive/summer1997brief4.pdf ?Take Great Care of Your Hands (2009). Retrieved on 4/28/2009, from http://beadwork.about.com/od/tipstricksandtems/ss/Hand_Care_2.htm ?What is RSI? (2009). Retrieved on April 28, 2009, from www.faqs.org/faqs/uk/health/rsi/section-2.html Research Papers on Repetitive Stress Injury RSIThe Hockey GamePersonal Experience with Teen PregnancyThe Effects of Illegal ImmigrationTwilight of the UAWIncorporating Risk and Uncertainty Factor in CapitalMarketing of Lifeboy Soap A Unilever ProductLifes What IfsResearch Process Part OneThree Concepts of PsychodynamicRelationship between Media Coverage and Social and